Fine Tuning – more Gladiator track

Started laying-in the track to get things up off the floor and on the wall. Some of the tall boxes got moved around and consolidated, mainly the Auto-und-Moto stuff, which aligns with the Toolboxes of metalworking and the left-side bench.
Garage work
garage corner
Did the washer-dryer corner.
washer corner
Then I started working on the Groundkeeping equipment-wall and the tall-box. The floor of the garage slopes away at that point (for rain-intrusion/drainage) and the tall box was listing as it stood on wheels, so time to get it up OFF the floor and onto the wall.
I measured three times to get the distances correct for the wall-track to receive the box-brackets, then hit all the studs with the impact-driver.
mower lift 2
mower lift
Then I used the lawn-mower hoist to jack-up the box and slide it into position. Voila! It dropped into the wall-track like magic.
Drop the mower-lift and pull it away to its lair by the water heater.
hoist
hoist 2
Still got a bunch of sporting-out to do with the yard-tools, but now there is (some) order from chaos.
tool wall

Loco-moco, we get to Work

I was feeling a bit frustrated about things in the garage at the ranch being disheveled and just not in the kind of shape I’d like for-to get ‘er things done. Like cleaning guns for one thing, and my lovely and talented and telepathic wife picked-up on that.
In the morning I awoke to a bunch of fully formed and expressed thoughts as she is wont, entire paragraphs emerge in the space of an eye-blink, while my own brain temperature is barely registering. Coffee! “Lets move the bench and couple of the rolling boxes.” And, I added, “Lets do rocks.”
Earlier on Sunday night in the coolness of the evening and with twelve sacks of tanbark lying around, I laid-out landscape fabric and cleaned up the area under the “pear” tree (“pear” because they are micro-miniatures and inedible and not real fruit except for being annoying – fruit is annoying). Then I started-in and ‘barked it. Looking good!
Likewise at Airport House, in and around the propane tank there was some need to better define the spaces – and by that I mean it needed bigger and more impressive rocks. We have ’em. The small, shoe-box sized, little rocks just lack presence and drama, even piled in a heap. You need some big ones to define the space. So we spent some time yesterday heaving and hauling and moving the big bad-boys – the 60-pounders and such – into more aesthetically pleasing locations and sites. And so We did that again today (this morning) too, and then ‘barked it. Nice!! My back is stronger now and not troubling me, knock on wood.
All done before the heat got-up, at 10:00 it was time for a Costco run.
After that we loaded the 200-lb behemoth 8-foot Gladiator maple-top bench into the back of the F-150, and along with that a tall rolling cabinet, a bunch of crap, and headed to the Ranch. Unloading went faster because things just fall down.
Then lunch at Bricks.
Then another trip the Airport House and a rolly-cabinet – the five-drawer – and back to the Ranch… Phew!!
The other rolling box that was central to my organizing NOW has a drawer for #1.) Motorcyckle stuff, and now a separate #2.) for Woodworking and saws and spikey-pointy-slicy things, and a #3.) for Metal-Shop crap and drill-bits and burning-torch thingy, and finally #4.) a catch-all Bottom Drawer full of all the heavy-heavy stuff, like the crowbar and plumber’s monkey-wrench and a bunch of heavy specialty vises, and the when-will-I-ever-need-it-again grease-gun, loaded with black moly. And clamps…
Done. Phew!
And the biggest challenge of ALL: the forty-drawer (miniature) nut-and-screw organizer-thing for all the weird crap. All the old fastener detritus that I had been neglecting and saving in zip-loc baggies, the weird and unfathomable mechanistic flat-top wood and machine-thread junk… And put them in a new, shiny, plastic same-thing but not stinky organizer. And things like electrical wire-nuts and fuses, and just crap.
And I did it!
Still have to dismantle the pre-existing wood-bench and save the plywood for decking up in the attic and the 2×4’s for various…but I’m on the home-stretch. More or less. There’s still the mud-and-tape and paint – but with mobile garage boxes that’s easy and a separate chore. Time to hit the hay.